Capability Catalogues
All partners belonging to Marine system & Mechanical equipment
-
Agility Group
28.10.08
Agility Group (formerly Grenland Group) is a full service engineering, procurement and construction company, specializing in medium-sized projects for the oil and gas industry and naval architecture. The company is located in ten different locations across Norway, as well as in Shanghai in China. Our headquarters are located in Sandefjord, Norway.
Agility Group’s growth is a result of our ability to deliver complex solutions within our three business areas:• Solutions• Fabrication• Maintenance & ModificationsWe have more than 1200 highly skilled professionals, contributing on our projects both in the global offshore oil and gas industry, as well as in the onshore industry. Our revenue in 2011 was approximately NOK 1.7 billion, and our goal is to double this revenue by 2015. -
Aibel AS
28.10.08
Aibel is an international company with a long reputation for quality, expertise, innovation, financial stability and, not least, exciting opportunities. Our products and services are in high demand all over the world and we are involved with some of the most exciting and challenging projects in the oil and gas industry, including new build, maintenance, modification and operation. A multicultural company of over 100 years of industry experience and more than 7,000 professionals, our dedication to meeting our customers' needs is matched only by our equal commitment to innovation, integrity, safety and environmental sustainability.
-
Bandak Group AS
07.05.10
Bandak Group AS is the mother company of the group and has employees in all locations. The company provide centralized shared services within Finance, IT, HR, Projects, Administration, QA, HSE, Procurement and has approximately 20 employees.Bandak group has production facilities in Halden, Lunde, Notodden, Risør, Ålesund, Kuala Lumpur (Malaysia) and offices in Porsgrunn -
Bandak Halden AS
21.05.10
Bandak Halden AS (former Norsk Verktøyindustri AS) is a well established mechanical company. The company has a history within the design and manufacture of complex production tools for various industries, the largest of which has been the automotive industry. Norsk Hydro owned the company until it became a part of Bandak Group in 2004. Bandak Halden has approximately 30 employees.
The company is located in Halden with main workshop and administration at Brødløs. Assembly and testing are done in facilities at Sørlifeltet. In total, the premises are approximately 2,800m2. Bandak Halden has high expertise in advanced machining, assembly and testing. Engineering, welding and surface treatment are provided by other Bandak Group companies and sub suppliers.Since 2007 Bandak Halden AS has been developed into a supplier dedicated fully to the offshore oil and gas industry.Together with the rest of Bandak Group, Bandak Halden AS will continue to offer system deliveries based on advanced technology and high quality products to demanding customers. -
Bolt Norge
21.06.11
The history of Bolt Norge and the Bondura® bolt began when a friend decided to build a dry stone wall at his farm – a famous feature of the Jæren region. He made good progress with the help of an excavator but it became increasingly difficult to position the stones. No matter how careful he was in driving the excavator, the stones did not end up where he had intended. Eventually, we concluded that it was the slack in the scoop that made things difficult. Some evenings were spent figuring out how this problem could be resolved. This resulted in the prototype of the Bondura® bolt.
Bolt Norge was established in 1986. Thus began the adventure of developing the bolt for use in construction machines and the oil and gas industry. Major oil-related companies were present during trials, which resulted in an increasing number of patents, Det Norske Veritas’ Type Approval Certificate and a general classification as Proven Technology.
We have been working with bolt and joint related problems for 25 years. This has provided us with a high degree of expertise that is increasingly used in collaboration with our customers in order to identify more effective product solutions. The products are used as original parts and spare parts both at home and abroad.
We have established a subsidiary in the USA in order to service and develop the market in North, Central and South- America. We are also working on a similar operation in Asia. Our aim is to be a global leader in expanding bolts for joint connections.
-
Control Cutter
03.01.11
Icebergs are a huge threat in the challenging Arctic and what may appear small on the surface may be enormous below. An iceberg can make contact with a rig or installation unexpectedly creating huge strains on anchor chains and even closely monitored ice floes can rapidly change direction.The ControlCutter is a device for the automatic, controlled cutting and securing of the ends of any type of wire or chain during uncontrolled or emergency anchor handling. The ControlCutter is a mechanical system and therefore can operate within any areas onboard rigs and vessels. Using a unique alloy in our mechanical knifes allows us to cut chains up to 162mm in less than 3 seconds. -
Delta-P Pumpe Og Kompressorsystemer As
12.02.09
Delta-p was founded in July 2006 by partners with many years of experience
to provide first-class service, pumps, equipment packages and related
equipment for the oil & gas market.
Delta-p performs engineering, process design, manufacturing and testing of complete equipment packages, both for low pressure and high pressure systems. Typical applications are methanol injection packages, chemical injection packages, booster system, condensate systems etc. Moreover, Delta-p calculates, designs and manufactures resonators for reciprocating pumps.
Delta-p is certified according to ISO 9001:2000, since April 2008. -
Ellingsen NOR Instruments
07.03.11
Ellingsen NOR Instruments supply systems for process control, specializing in valves, instrumentation, control systems and skids for offshore, marine, and industrial sectors.
Ellingsen NOR Instruments offers complete or partial delivery of the entire process from design to installation, via engineering, assembly, and documentation. Ellingsen NOR Instruments take the full responsibility for all types of skid deliveries, from small units to larger system assemblies.
The HYDROVAC™ Oil Purifier removes water, impurities and gas from lubrication oil and hydraulic oil. The purifier removes 100% of free water and gases and 90-100% dissolved water and gases.
The Ellingsen Water Sampler (EWS) is a special designed valve for sampling of produced water. It samples and tests directly from the process stream without disturbing the process itself. The continuous flow prevents scaling.
Ellingsen NOR Instruments was founded in 1962, has 54 employees, and is located in Bærum (head office), Bergen (service office) and Stavanger (sales office). With 50 years of experience in the market we have developed in to at leading supplier of quality products and services. Ellingsen NOR Instruments is certified according to ISO 9001:2000. -
Ferguson Norge AS
28.10.08
Ferguson Norge AS operates from bases in Norway through Stavanger, Bergen, Florø and Kristiansund. We are also represented in Esbjerg, Denmark. All bases include workshops for maintenance.
Together with the rental division in Scotland, Singapore and Australia, the Ferguson Group has more than 11500 certified containers, baskets, tanks, mud skips and tubular transportation frames available around the world for rental to the offshore market.
Our modules and rental fleet are manufactured in accordance with the most demanding specifications in the industry; DNV 2.7-1 and EN 12079. FNAS is accredited to ISO 9001:2008. -
Glamox International
28.10.08
Glamox International AS supplies a complete range of lighting equipment for the marine market, offshore and oil & gas industry. The company s comprehensive product range includes a complete range of light for hazardous as well as safe areas, for external and internal use and with European and American approvals. Glamox International AS is a subsidiary of the Glamox Group and operates globally.
-
GMC HVAC AS
28.10.08
The company is a supplier of complete HVAC systems with customers mainly in the offshore industry, where we are a respected market leader. This is especially true for newbuildings. We are market leaders in new HVAC installations for rigs and modules. Maintenance, servicing and reparations offshore make up a large part of the turnover. In the HVAC area there is room and need for new ideas and product development. A result of this is the product Simvent - a ventilation system that is used in several drilling cabins offshore today. GMC HVAC was established in 1988 as Marine HVAC. In 1997 we moved from Forus to Dusavik and became part of the GMC Group. Today the company is in a period of high growth. The company is made up of approximately 50 highly motivated employees that deliver quality throughout.
-
GS-Hydro Norge A/S
28.10.08
GS Hydro provides innovative solutions to high and low pressure pipe jointing problems, and is known as the world’s leading supplier of “piping without welding”. GS Hydro provides substantial cost savings and other major benefits to clients around the world, and today some 3000 ships, 50 drilling rigs and numerous oil and gas platforms are fitted with GS piping systems.
-
Hamworthy Gas Systems
29.10.08
Hamworthy is a leading designer, developer and manufacturer of advanced marine fluid handling systems for ships and offshore oil and gas facilities. The company specialises in innovative and often highly customised designs for marine gas handling, pumping and water systems. Hamworthy specialises in technologically or contractually demanding markets where our expertise in systems and contract management gives us a clear competitive advantage. These markets are gas and liquid cargo handling, cruise, naval and offshore.
-
Imenco
29.10.08
Imenco is a product supplier and an engineering company with focus on the offshore and marine sector. The company has a strong knowledge base of existing subsea solutions. Imenco has wide experience in mechanics, hydraulics and electronics engineering, design and product supply. Imenco s standard product range is concentrated in supply to the offshore and marine sector and is ranging from Subsea Guiding Systems to Remote Tooling.
-
IOS Intermoor
18.10.10
IOS InterMoor AS is Norway’s leading distributor of mooring equipment and related services to the oil industry and other offshore industries. In partnership with the world’s leading manufacturers within this sector, we provide complete solutions adapted to individual needs for rental and/or sale.
Mooring, lifting and towing equipment:
With major resources within a demanding sector, we offer complete solutions adapted to individual needs. Heavy investment in quality brands from leading manufacturers means we have the capacity to supply modern and flexible equipment for a range of operations within mooring, lifting and towing.
Applications include:- Rig mooring
- Pre-lay mooring systems
- Special mooring arrangements
- Towing and lifting operations
- Spooling of wire and fibre rope
- Inspection of mooring equipment
Deep water mooring system:
IOS InterMoor AS has designed a system for deepwater mooring for rigs operating on the Norwegian continental shelf. The eight point mooring system is comprised of a retrieval system, large 15t drag embedment anchors, 1,800m of mooring chain, 1,200m of polyester fibre rope and marker buoys for a quick identification and hook up when the rig arrives. All equipment is pre-installed using a single anchor handling vessel and ready for rig hook-up.
Rental and sales of mooring equipment.
Thanks to a combination of rental and sales, our customers can define their specifications. Whether they prefer to rent or buy equipment for short-term or permanent use, we tailor-make flexible solutions based on individual needs.Mooring and lifting equipment services and maintenance:
Our service department performs repair and maintenance of all types of equipment for use within mooring and lifting. Equipment rented out is refurbished and quality-checked before being rented out once more. Through cooperation with some of the world’s leading manufacturers of mooring equipment and services IOS InterMoor AS can provide:- Mooring analysis and anchor holding analysis
- Chain inspection services
- Offshore personnel for supervision of rig moves and mooring installations
- Logistic support for cost effective mob and demob of mooring equipment
-
iSURVEY GROUP AS
29.10.08
iSURVEY GROUP AS offers specialist navigation, positioning and survey services to support a variety of professional offshore operations The experienced iSURVEY team uses state of the art technology from the leading manufacturers to provide:
• multi-vessel operation management
• a complete range of sub-sea positioning solutions
• survey data acquisition and processing with a state of the art positioning and survey services, iSURVEY supports professional offshore operations
• Experienced offshore surveyors
• The iNAV and iSAFE system solutions
• Eiva’s on-line and off-line navigation and survey software systems
• The global VERIPOS DGNSS services
• Complete service range subsea positioning
• Seabed survey data acquisition
• Vessel
• survey gyro calibrations
• USBL system calibrations
• sensor surveys
• Yard construction dimension control surveys
• Preparation of technical procedures and work instructions
• Data processing, reporting and documentation -
Jotun
04.11.09
The Jotun Group is one of the world's leading manufacturers of paints, coatings and powder coatings.
The group has 71 companies and 40 production facilities on all continents. Including the total network of legal companies, agents, branch offices and distributors Jotun is represented in 80 countries. Jotun's operations cover development, production, marketing and sales of various paint systems and products to protect and decorate surfaces in the residential, shipping and industrial markets. In 2008 the Jotun Group had a total sales income of NOK 11 703 million, and has today 7 200 employees.
Headoffice is located in Sandefjord, Norway.
-
K. Lund Offshore as
29.10.08
K. LUND Offshore as is the leading manufacture of air and gas compressors, air dryers and nitrogen generators for offshore platforms. Packages are designed, manufactured assembled and tested according to project specifications at our facilities in Stavanger Norway. Ingersoll-Rand and Greenfield (Sulzer Burckhardt) compressor blocks are used in our packages. Complementary products include air and hydraulic hoists and winches, hydraulic cylinders, jacks and tools. We offer long and short-term rental of all lifting equipment, jacks and tools. A high quality service team provides at site service assistance.
-
Marine Aluminium a.s
29.10.08
Marine Aluminium AS (MA) is one of the world’s leading companies within engineering, design and fabrication of aluminium structures and products for the offshore and shipbuilding industry. MA has more than 50 years experience working with aluminium, with particular competence in the fields of material technology, extrusion tooling and welding techniques. The site includes spacious indoor facilities, as well as a large quay capable of load out of structures in excess of 1000 MT and mooring up to three rigs simultaneously.
-
Marine Cybernetics
12.01.09
Marine Cybernetics specializes in providing safety and cost-effectiveness our customers by independently testing the control systems on ships and offshore installations. We assess marine control systems using Hardware-In-the-Loop (HIL) testing which is based on our unique and patented CyberSea Technology. This method of testing results in a more thorough and relevant assessment of the control system compared to other solutions available. HIL technology is used in the development and testing of computer control systems. HIL is accomplished by connecting the control system to a simulator of the ship or offshore installation. The control system is then tested under realistic operating conditions. Independent testing by Marine Cybernetics is an essential element of working towards higher quality for control systems in the marine and offshore industry. Our testing technology is tailored to meet the needs of each vessel to make ship commissioning, sea trials and class approval more efficient, as well as reduce operational risk and downtime. HIL testing by Marine Cybernetics is in compliance with DNV's Standard for Certification of HIL Testing. Marine Cybernetics offers HIL testing for: Dynamic Positioning Systems, Power Management Systems, Propulsion and Thruster Systems, Nautical Systems, Ballast Systems, and other mission-critical control systems.
-
MARINTEK
29.10.08
The Norwegian Marine Technology Research Institute (MARINTEK) performs research and development for the offshore industry. MARINTEK’s hydrodynamic laboratories are unique facilities for verifying the behavior of floating offshore systems. Their main work during recent years has been focused on behavior of floaters in harsh environments, positioning systems for large water depths and feasibility and control of complex marine operations. MARINTEK is also strongly focused on the structural analysis of risers and pipelines, and operational scenarios and logistics support systems. MARINTEK employs 165 people and revenues for 2005 were US$ 29.7 mill.
-
Nexans Norway AS
29.10.08
Nexans Norway AS offers a wide range of products, systems and services for the offshore sector. The company produce and install power cables and combined power and signal cables between platforms and between shore and platform. Nexans has developed advanced umbilicals for transmission of power, signals and fluids for the management and control of production wells on the seabed.
-
NOREQ
03.01.10
Based on many years’ experience combined with close follow-up of our customers and through innovative thinking, Noreq constantly find new ways of improving lifesaving equipment at sea. This means better access for our customers to safer, more user-friendly and cost-efficient products.A new standard in lifesaving equipment
The specific practical improvements and modifications you find in our maritime equipment are a reflection of many years of experience of working together with the maritime industry and our customers. That is how we constantly improve the designs by choosing even more advanced components and materials of higher quality.
-
NORSAFE AS
29.10.08
Norsafe AS is one of the oldest boat-building companies in Norway. Since it was founded in 1903, the company has supplied more than 15.000 lifeboats to the global ship and offshore market. Norsafe conventional lifeboats are used all over the world, both on ships and offshore installations. The largest free-fall boats can withstand drops from great heights up to 37,5 m and are highly space efficient.
-
Norske Ventiler
25.01.10
Norske Ventiler AS designs and produces standard and tailor made quality valves from a wide range of materials including special alloys.
Located at the rim of the North Sea we have served the oil and gas industry for over 20 years with valves of high quality with unbeatable lead times. Our success is based on our ability to listen to our customer's needs and marked demands in addition to highly qualified personnel.
Norske Ventiler AS was founded in 1987 by engineers experienced from the North Sea oil sector. It started with maintenance and repairs on valves but quickly developed to a valve manufacturer. Our location enables us to develop our own designs in close cooperation to demanding customers and challenging environments at our doorstep.
In the year 2000 we moved to new production facilities and high-tech machine park. Every part of the valve is made in-house and gives us complete control over quality and planned lead times.
Our reputation as a flexible and customer-oriented supplier of high quality valves with short delivery times earned us the title "supplier of the year" in 2006 by PM international.
Our aim for the future is to strengthen our position world-wide and keep our position as a innovative valve manufacturer. One of our key objectives is to make sure we always have a high level of knowledge for all our employees.
-
Novenco AS
29.10.08
Novenco develops and manufactures high-quality ventilation and fire fighting systems that are marketed and distributed world-wide through subsidiaries and agents. The company was founded in Denmark in 1947 and has become one of the world-leading suppliers. Novenco symbolises quality and environmentally friendly products and is certified according to ISO 9001:2000 and ISO 14001:1996. HVAC Air handling units, Air handling containers, Fans, Cooling equipment, Sound attenuators, dampers, intake system Fire fighting Water mist local protection system Water mist full protection system
-
Oiltec Solutions AS
01.01.12
Oiltec Solutions AS is located in Sandnes, Norway. We are an energetic team of software engineers with long expertise within Oil and gas simulation and visualization. With our track-record from Hitec ASA, Hitec O and L-3 Communications, we have delivered high-end simulators to leading customers all over the world.
Oiltec has two departments; Solutions that deliver software and turn-key simulator solutions and the Academy that delivers Training services.
Our ability to tailor our solutions to the specific customer needs- and requirements, have given us great recognition in the O&G comunity. We always work with the aim to improve our customers ROI (Return On Investment) on their simulator and training investment. Our ability to combine both the training tools and to execute the training programs - simplifies the process to improve your personnels skill set and safety standards.
We are here to make your people perform better! -
Palfinger Dreggen AS
26.03.09
Valid from November 27th 2012 DREGGEN has changed owners and is renamed PALFINGER DREGGEN.Bergen Group Dreggen was established in 1987 by six engineers from former Munck Offshore. Going from next to zero turnover in 1987 to almost NOK 200 million in 2008 .
We are now counting 60 permanent employees from 12 different countries and we are sending our cranes to all parts of the world. We manufacture our cranes in Bergen but are also using production facilities in Poland, Lithuania, Korea and China based on Bergen Group DREGGEN’s design and components.
Bergen Group Dreggen’s main products are slewing cranes for the marine industry and rail travelling cranes for the offshore industry. The lifting capacities of the cranes range from 500 – 400.000 kgs and all parts are designed and manufactured according to customer’s needs and requirements.
To the offshore industry Bergen Group Dreggen delivers: hydraulic, electro-hydraulic, pneumatic and electric operated BOP handling cranes, X-mas tree handling cranes and deck cranes for use in explosive area of the installation.
To the marine industry Bergen Group Dreggen delivers: Engine room cranes, provision handling cranes, monorail provision handling cranes, service cranes and hose handling cranes. -
Parat Halvorsen AS
31.01.12
Parat Halvorsen AS is a global supplier of steam and heat systems for Industrial, Marine and Offshore application. First established in 1842 we have acquired significant experience with all kinds of heating systems. We have been a supplier to the marine and offshore industries since 1972 and have developed an extensive product range through more than 1000 successful project deliveries. We design, construct and deliver a vast range of steam and heat systems/modules ranging from 100kW to 50.000kW output.
The factory and head office is situated in the city of Flekkefjord on the south coast of Norway, just two hours from the Offshore capital of Stavanger.Products:- Waste Heat Recovery Systems.- Heating medium systems.- Packaged steam boilers and hot water boilers.- High Voltage electrical boilers up to 50MW (steam or hot water).- Low voltage electrical boilers up to 10MW (steam or hot water).- Exhaust gas economizers.- Water tube boilers.- Smoke tube boilers.- Pin-tube boilers.- Finned tube economizers.- Containerized boilers.- Calorifiers.- Hot water service packages. -
Parker Maritime AS
29.10.08
Parker Hannifin Corporation acquired Scan Maritime AS as a part of Scan Subsea ASA in November 2007. Parker Maritime AS, formerly Scan Maritime AS and Blom Maritime AS, offers measurement world wide in all fields, ranging from traditional land-surveying to highly specialized industrial dimensional surveying and geometrical control measurements, maritime measurement, as well as ocean charting in Norway. The company has also implemented photogrammetry for high-accuracy subsea metrology. Parker Maritime has performed Subsea Metrology using Photogrammetry since year 2000 and has executed more than 75 projects. In October 2007 we released our new system - SICAMS, with unique features.
-
PG Pump Solutions
22.02.09
PG Pump Solutions’- core business is pump- and compressor systems and packaging. This cover the expertise, products and applications and service, -up- and down- stream the pump. Including control systems, drives, instrumentation and installation & commissioning of advanced systems – further design, engineering and manufacturing to the highest industrial standards.
-
Pon Power Scandinavia
26.10.09
Pon Power is the authorized distributor of Cat engines and gen-set in Scandinavia and The Netherlands.
We offer complete systems throughout the product spectrum, ranging from 6.4 to 16,200 kW, which are mainly used as propulsion and auxiliary engines, primary power or emergency power, for fire-fighting pumps and cranes in offshore installations.All engines are designed and tested to fit your needs. With our special engineered products like Genflex and ATEX solutions, you can minimize vibrations and heat to safely install Cat engines in Zone II areas.We are renowned for our efficient 24-hour service and rapid delivery of spare parts, wherever they are needed. Our Caterpillar certified Service Technicians and original Cat spare parts will keep your business running. Anytime.Pon Power is certified according to these standards for the O&G industry: ISO 9001, ISO14001, OH18001, Sellicha, Startbank and Achilles - illustrating our focus on quality, safety and environmental responsibility. -
ProAnalysis
29.10.08
ProAnalysis is a supplier of Oil in Water (OiW) monitors, with headquarters in Bergen, and international sales offices in The Netherlands. The Argus® technology for on-line in-line OiW monitoring is developed in close co-operation with major North Sea operators, leading to two different products; Argus Environment for environmental (discharge) monitoring and Argus Process for water treatment process monitoring. Argus® has been thoroughly tested at numerous North Sea oil and gas fields. First commercial deliveries were made in 2005, and the Argus products are now available in key markets worldwide.
-
ProSep Norway AS
29.10.08
ProSep Norway AS designs, develops, manufactures, and commercializes process solutions to treat, separate and purify oil, gas, and water for the O&G upstream industry. ProSep has a wide range of conventional and proprietary process equipment sold in units or in packages to O&G producers and engineering procurement and construction firms (“EPC”) with or without process warranties.
ProSep is a solutions provider supplying high efficiency process equipment packages with process warranty. The company provides in-house engineering from the process to the details as well as both direct and hands-on involvement with project management that includes fabrication, assembly commissioning, and services.
ProSep has approximately 100 employees, mainly technical sales people, process engineers, product engineers and project managers and workers in its new 56,000 square foot assembly shop located in Houston. ProSep Inc. is a Canadian-charted company listed on the TSX Exchange (symbol: PRP), headquartered in Montreal, Quebec, Canada. Operations are carried out through a network of companies around the world: ProSep (USA) Inc. (formely know as Technologies, Inc.), in Houston, USA; ProPure in Bergen, Norway; ProPure ME in Manama, Bahrain; and ProSep AP in Kuala Lumpur, Malaysia. All companies are working together to meet the needs of our customers.
-
QuickFlange AS
29.10.08
Quickflange is a company delivering technology for ”cold” operations involving pipe and flange connections. The QF technology consists of a hydraulic tool enabling a flange - to - pipe connection without the use of heat or any other potential ignition sources. The QF method gives a pressure tight and mechanically strong connection, and is a direct alternative to a welded connection. Our equipment is rented out on a day-rate basis, and the actual operation of the equipment is carried out by QF-certified personnel from the oil companies MMO suppliers. The idea was conceived i 2003, and Quickflange has developed the technology from the idea to a commercial product through co-operation with Statoil ASA (LUP – program) and Innovation Norway.
-
Rapp Bomek A/S
29.10.08
Rapp Bomek is Norway’s leading manufacturer of fire- and blast proof doors for the onshore and offshore petroleum industry. The company has 25 years of experience from supply of fire- and blast proof doors. In addition to the home marked, the Rapp Bomek doors are used world-wide. The company is part of the Rapp Marine Group.
-
Remora ASA
29.10.08
Remora ASA is responsible for development, marketing, sales, project execution and service of HiLoad Systems based on the patented HiLoad Technology. HiLoad Systems require no modifications to the vessels and are used for offshore loading of crude oil, and for mooring of FPSOs and FSOs. Remora is listed on the Norwegian "Over-the-Counter" (OTC) bourse with ticker code REMO.OTC. The headquarter is in Stavanger, with offices in Lagos and Houston.
-
Rolls-Royce Marine
24.02.10
Rolls-Royce can trace its roots in the marine industry back as far as 1849 - a time span which includes the development of many ground breaking technologies, from the development of the controllable pitch propeller, tunnel thruster and nuclear propulsion for Royal Navy submarines - to marine aero-derivative gas turbines, waterjets and innovative offshore vessel designs.
Rolls-Royce is committed to the marine market and maintaining its world leading position in the design, development, supply and support of products and systems for commercial and naval customers worldwide.
With a primary focus on power, propulsion and motion control solutions, Rolls-Royce serves over 2,000 customers and has equipment installed on 30,000 vessels operating around the world.
Our extensive product base and proven experience in both ship design and systems integration, enables Rolls-Royce to bring the right products together to develop the systems that meet the performance requirements.
Customer focus is maintained through our four business units that address specific market segments - Merchant, Naval, Offshore and Submarines. A global support network underpins all activities and ensures contracts can be undertaken, and Rolls-Royce support is at hand anywhere in the world.
A strong focus on research and development has seen Rolls-Royce become the pioneer of many important marine technologies that include; aero derivative marine gas turbines, controllable pitch propellers and waterjets. -
Scana AMT as
13.02.09
Scana AMT is a service company, a product supplier, a consulting firm in addition to system integration specialists within design and detail engineering of mechanical and hydraulic products and systems – including control. Furthermore, Scana AMT deals with systems and project
management during production phase, including thermal spraying of steel components (new and refurbishment). -
Scana Industrier ASA
12.02.09
Scana is a Norwegian industrial group operating in three business areas, namely oil and gas, steel and marine, all of which play an important role in various segments of the international petroleum industry. Our offer of know-how and experience within metallurgy, service and repair as well as design and production of tailor made products are provided through our daughter companies which employ highly skilled personnel to ensure customer satisfaction in compliance with the most stringent requirements of the business.
-
Scana Mar-El
13.02.09
Scana Mar-El was established in 1974 and is one of the leading manufactures of maritime electronic remote control systems for propulsion, manoeuvring and special applications. Its products can be found on every type of vessel, from fast ferries, yachts and fishing vessels to seismical vessels, supply ships and floating platforms. In addition we have a substantial sale of components from companies we represent in Norway.
We look upon ourselves as a part of the strong European and Norwegian tradition of equipment and service suppliers to the world wide marine industry. We will contribute to maintain and develop this tradition by supplying excellent products in compliance with the rules and customers requirements to the lowest possible life cycle costs. -
Scana Offshore Technology as
13.02.09
Scana Offshore Technology is a service centre for the oil & gas industry covering maintenance, repairs, re-certification and laboratory services for both drilling and production units.
Moreover, the company manufactures parts – incl. delivery of steel (casted or forged from internal sources), welding, machining, heat treatment, material analyses, dimensional control and NDT/NDE.
Scana Offshore Technology operates with various clusters. It’s products and services cover those clusters as follows:
- Drilling equipment cluster: Scana Offshore Technology is both a service company and a product supplier. It offers Spares, steel components and risers/riser components to be produced, re-certified and repaired, in addition to machining capabilities.
- Subsea cluster: In the subsea field, Scana Offshore Technology is a product supplier, a service compnay and a consultant service, where it deals with Spares, steel components and risers/riser components to be produced, re-certified and repaired, machining capabilities and general engineering and consultant services (specialist within metallurgy) and laboratory services.
- Platforms and Terminals cluster: General engineering and consultant services (specialist within metallurgy) in addition to laboratory services; spares, steel components and risers/riser components to be produced, re-certified and repaired, machining capabilities.
- Decommissioning: Spares, steel components and risers/riser components to be produced, re-certified and repaired, and machining capabilities.
- Operations: As a service company, Scana Technology provides spares, steel components and risers/riser components to be produced, re-certified and repaired, and machining capabilities. Whereas a consultant company, Scana Offshore Technology works with general engineering and consultant services (specialist within metallurgy) in addition to laboratory services.
- Drilling equipment cluster: Scana Offshore Technology is both a service company and a product supplier. It offers Spares, steel components and risers/riser components to be produced, re-certified and repaired, in addition to machining capabilities.
-
Scana Offshore Vestby AS
13.02.09
Scana Offshore Vestby offers production of mechanical and hydraulic products and systems including control systems. In addition to the production of offloading systems for FPSOs and other production units and production of winches.
Scana Offshore Vestby operates within mechanical, machining and welding capabilities (new products and repairs) and thermal spraying of steel components (new and refurbishment). -
Scana Steel Stavanger As
13.02.09
Scana Steel Stavanger AS offers engineering, production and delivery of free-form forged and cast components for offshore oil and gas production installations and drilling rigs.
Scana Steel Stavanger operates with several clusters- as a product supplier, service company and consultants, described as follows:
- Drilling equipment cluster: As product supplier: Cast and forged steel for drilling units.
As consultants: General engineering and consultant services (specialist within metallurgy).
In addition to laboratory services.
- Subsea cluster: As product supplier: Forged duplex/super duplex steel material and components and cast steel material and components.
As consultants: General engineering and consultant services (specialist within metallurgy).
In addition to laboratory services.
- Platform and Terminals clusters: As product supplier: Structural cast steel elements and components and forged stainless steel elements and components.
As consultants: General engineering and consultant services (specialist within metallurgy).
In addition to laboratory services.
- De-commissioning Cluster: As a service company: Material testing and metallurgical consultant services.
As consultants: General engineering and consultant services (specialist within metallurgy).
In addition to laboratory services.
- Operation Cluster: As consultants: General engineering and consultant services (specialist within metallurgy).
In addition to laboratory services.
- Drilling equipment cluster: As product supplier: Cast and forged steel for drilling units.
-
Scana Volda As
13.02.09
Scana Volda has a long tradition inside design and production of gear and propeller systems for vessels with power in the range of 1.000 to 30.000 horsepower. For the offshore business, Scana Volda is a major supplier of propulsion systems to the supply- and anchor handling vessel fleet.
Sales and service activities take place throughout the world. -
Solberg & Andersen
09.05.11
Solberg & Andersen AS is the market leader within engineering, supply, service and maintenance of valves for the Norwegian oil and gas industry and land-based process industries.
We have supplied valves to most of the platforms on the Norwegian continental shelf. Our most important partner is Fisher Controls, a member of the Emerson group, and which represents the most advanced technological solutions within regulating valves, diagnosis, remote control and instrumentation for cost-optimized operation.
Know-how and information are the keys for all Solberg & Andersen employees and are vital to being able to undertake cost-effective projects for our customers.
The SHELF concept’s information system makes it possible for us to develop new solutions, activities and proposals for cost-reduction measures.
Our ability and knowledge of how to handle such information means we can take on extended responsibility for operations, monitoring, repairs and maintenance.
Working closely with our customers we can develop the solutions in which a large element of the risk associated with operation and maintenance of equipment is handled by Solberg & Andersen .
-
Stream AS
11.10.11
STREAM is a leading supplier of products, solutions and services within valves, instrumentation and piping for the oil and gas industry.
The STREAM group consists of Solberg & Andersen AS, Teamtrade AS, and Energy Piping AS (previously Ahlsell Oil & Gas), which all represent a number of prestigious global suppliers.
The companies are located in Stavanger, Bergen, Oslo, Kristiansund, Porsgrunn, Frankfurt and Duisburg. STREAM is owned by Converto Capital and HitecVision.STREAM has 335 employees.
-
STX OSV AS
22.03.11
STX OSV is a major global shipbuilder, constructing offshore and specialized vessels used in the offshore oil and gas exploration & production and oil services industries.Our core business is innovative design and construction of complex and highly customized OSV's, including PSV's, AHTS's and advanced OSCV's. In addition, we produce specialized vessels such as LNG-powered ferries, naval and coast guard vessels, fishing vessels and non-offshore related icebreakers with customers-specific applications.We have nine shipbuilding facilities worldwide – five in Norway, two in Romania, one in Brazil and one in Vietnam. Our strategically located shipyards enable us to meet every need of a diverse and sophisticated global customer base. -
Subsea 7 Norway
10.11.08
Subsea 7 is one of the world's leading engineering and construction companies offering all the expertise and assets that make Subsea Umbilical, Riser and Flowline (SURF) field development and operation possible. With a multi-national workforce in excess of 5,000 personnel, the company's offshore operations are supported out of Norway, UK, the Netherlands, Africa, Brazil, Gulf of Mexico and Asia Pacific. Subsea 7 carries out its Subsea field development business in all the major offshore oil & gas markets globally.
We install infield rigid and flexible pipelines up to 16" diameter, riser systems and umbilicals connecting production facilities on the seabed to fixed or floating platforms. The company provide a full range of complementary design, fabrication and installation services for related subsea hardware in order to offer a total subsea field development package. Inspection, Repair and Maintenance of this infrastructure throughout the producing life of the oil and gas fields is critical in order to protect the operators' investment.
Subsea 7 offers the experienced personnel, the right assets and equipment to deploy, such as state of the art ROV's, and expert manned and unmanned intervention technology, that is so critical to this market. Subsea 7 uses the latest technology and techniques to undertake survey, positioning and inspection services to produce high-quality processed information. We work with clients to analyse survey results, help them develop maintenance plans and then execute the plans on their behalf. Our deep-rooted health, safety, environmental and quality culture is inherent in all we have achieved to date and remains the pivotal foundations of performance as Subsea 7 continues to develop its position as the global Subsea Partner of Choice.
Subsea 7 has two business lines that are directly related to Subsea activities but sit outside our core Subsea field development and IRM business. i-Tech provides ROV services specifically to the drill rig market and operates in all the major deepwater markets globally. Veripos is a specialist precise positioning service business for the oil and gas industry that allow ships and vessels to operate and install assets in all water depths globally. It is against this background that Subsea 7 will continue to look at advancing intervention and deepwater technology through sponsorship of an aggressive R&D programme and participation in joint industry projects that address a wide range of deepwater production issues.
-
Techni
03.01.11
Techni AS was established in 1996 and has since then evolved to becoming a leading R&D consultancy with 40 members of staff. At Techni AS all our employees from the various disciplines work closely together in project groups. This allows for better communication between staff which allows them to share experience and expertise. It is this communication that gives Techni AS a leading edge which leads to less chance for miscommunication and unnecessary time consumption.
We deliver cutting edge R&D services within mechanic, electronic and Industrial design along with production. We can aid you and your company through the complete development process tailoring the services to your needs. So, whether you need a concept study as a start package or the whole process from idea to production Techni AS is the safe choice.
Techni AS is a R&D consultancy with production capacity with expert knowledge within Oil&Gas Industry, Health Care Industry, Green Technology, Defence Industry and Consumer Industry. Our staff is able to take on any task or service you and your company may require. Techni AS is the safe choice who delivers quality every time. -
Technip Norge AS
10.11.08
With a workforce of 21,000 people worldwide, and annual revenues of about 5.4 billion euros, TECHNIP ranks among the 5 major players in full-service engineering and construction services in the field of hydrocarbons and petrochemicals. Resulting from the merger of two champions in their respective businesses, TECHNIP is one of the most integrated groups providing engineering, technologies and construction services to the oil/gas and petrochemical industry worldwide. With nearly 50 years of experience in the design and construction of large industrial facilities, a wide range of state-of-the-art technologies and operational bases spread over the 5 continents, the Group is able to manage all aspects of major projects at optimized costs, from front end engineering design to turnkey delivery. TECHNIP is listed in New York (NYSE:TKP) and in Paris (EURONEXT:FR0000131708). Technip Offshore Norge employs about 200 people in Norway with annual revenues of 185 – 265 million €. Focusing on pipeline systems and marine operations, Technip Offshore Norge has become over the last 20 years a leading offshore engineering contractor in the development of subsea fields on the Norwegian Continental Shelf. Offshore Norge is involved as EPCI contractor in several significant field development projects in the Norwegian sector of the North Sea. To further strengthen its organization in Norway, Technip Offshore Norge has established offices in both Stavanger and Haugesund, in addition to the main office in Oslo.
-
TESS
10.06.10
TESS is Norway’s leading supplier of engineered systems and services for hoses and hydraulics for the oil & gas industry. TESS coordinates more than 100 service centers, in Norway, Denmark and Scotland, with workshops and hose technicians approved by DnV.
TESS is recognized as a reliable supplier of high quality products and services for more than 40 years. 800 employees served a turnover of more than USD 300 million in 2009. We have established a dedicated technical division with R&D activities, customized production and total solution deliveries.
Together with partners TESS takes the full responsibility of:
- Hose handling systems/offshore loading
- Customized hose solutions
- Hydraulic flying leads (HFL) and bundles
- Subsea Umbilicals
-
Hydraulic power units (HPU)
-
Thermtech AS
10.11.08
Thermtech -
Torgy Mek. Industri As
03.01.10
An alliance of Strength and Experience born out of a common culture of customer focussed innovation and service to provide an integrated product portfolio for all types of Insulated & Un-insulated Pipe Supports, Clamps and related equipment to the Worlds Oil & Gas Processing Industries.
Torgy Atlantic is one of the Worlds Leading Suppliers of Pipe Supports & Related Products bringing over 60 years experience.
-
Trans Construction AS
28.10.08
Trans Construction AS ( ATC ) is an EPC Contractor providing containers, modules and other welded constructions for a wide range of offshore- or onshore projects. Our services range from supplying containers, outfitted to our customer’s specific requirements, to the design and construction of complex modules delivered as turnkey solutions with multidiscipline engineering, fabrication, installation and testing.
Our core business is directed towards the Oil and Gas Industry, where we work very closely with our clients in order to make sure the products we deliver meet the project requirements with respect to safety, quality, functionality, documentation and economy.ATC was established in 1976 and employs 17 persons, all with a broad- and long experience in performing this type of projects. All engineering and some fabrication is done in Norway. ATC also has a close cooperation with workshops in both Poland and the Czech Republic.
-
Trelleborg Offshore Norway AS
10.11.08
Trelleborg Offshore Norway AS (Trelleborg) is a leading provider of sophisticated rubber solutions, and is a subsidiary within the Trelleborg Group. The core business is to protect against corrosion, increase safety through fire protection and securing flow by use of thermal insulation. Trelleborg serves the international oil and gas industry, renewable energy projects, marine and defence markets. The company was established in 1896, and has been a major manufacturer of rubber ever since. More than 100 years of competence has been refined into advanced polymer technologies for the global oil and gas industry.
Application technologies and solutions
• Passive Fire Protection
• Corrosion Protection
• Thermal Insulation
• ELASTOPIPE™ - A corrosion proof and flexible piping system.
. -
TTS Marine Cranes
25.02.10
TTS Marine Cranes is a supplier of cranes, davits and winch bollard to the merchant and offshore fleet of vessels operating worldwide. From the head quarter in Bergen, Norway, TTS Marine Cranes runs a global network of subsidiaries, sales and service offices. The entire organization is therefore able to work closely with customers, wherever they may be located, to meet their individual and specific lifting requirements.
Based on the experience and expertise gathered since the 1960s, TTS Marine Cranes offers a wide range of onboard cranes, davits and cargo handling solutions to ship owners, managers, and yards.
-
Umoe Schat-Harding Group
06.09.11
Umoe Schat-Harding is the global market leader in marine life saving systems and offers the largest worldwide service network in the industry.
When designing, manufacturing and servicing, we provide lifetime support for a wide range of innovative lifeboats, davits, winches and rescue boats which all have one purpose: the safe evacuation of crews, passengers and offshore workers.
The group employs approximately 600 on a worldwide basis.